Yalnizca The World and Modern Science
  • Repair Leaks Punctures

    Filed under News
    May 1

    You should also consider stout sewing needle like the #1S sailmaker s needle. Make sure you do include 5 to 6 yards of 3 or 5 ply polyester thread. Tubes of glue do dry up so make sure you have extra tubes. You also need a form of cutter for cutting patches accordingly, a permanent marking pen, acid brushes and a spare valve diaphragm if appropriate. You should also have spares of small items that you might lose or break during a trip. How to Repair Leaks Punctures happen at the most unexpected time. If your boat springs a leak because if an object that accidentally hit it, make sure you don t take out the offending object if it s still lodged into the boat. Doing so would only hasten the boat s deflation.

    If you are in the middle of a body of water, bring out the pump and inflate the boat every so often to inflate it. Read more here: Crawford Lake Capital Hedge Fund. Look for a place to land the boat so you can fix it. Once on dry land, mark the puncture with a marker before totally deflating the boat. Dry the area to be patched. Abrade the area around the hole using the coarse stone or surrender. Do the same to the patch.

    Make sure the patch is the right fit for the puncture. A good fit will have at least to inch of excess patch around the puncture Coat the outlined area of the puncture in excess of at least inch. Coat the patch and let dry. Make sure that the area to be repaired is on a flat surface and the fabric stretched to a point. Coat a second time. When the glue no longer sticks to the finger, press the patch into position. Make sure you press the patch with pressure to make if glue to the hole perfectly. You can inflate the boat immediately after but if you choose to wait a while before you do, the extra curing time is a plus. For more information about inflatable boats repairs: minor damage visit:

Comments are closed.